Presented at National Conferences

42 / Rajeesh. K. R, R. Gnanamoorthy, R. Velmurugan, “Polyamide 6 nanocomposites for automotive applications; Moisture effect on tensile behaviour” IPRoMM 2009, IIT Madras, July 10-11, 2009, p 128.

 

41 / Timmaraju V. Mallina, R.Gnanamoorthy, Krishna Kannan, “Polyamide clay nanocomposites for automotive applications; Thermal characteristics in different environmental conditions” IPRoMM 2009, IIT Madras, July 10-11, 2009, p 116.

 

40 / Arun Prakash N, R. Gnanamoorthy, M. Kamaraj., “Friction and wear behavior of fine grain structured aluminium alloy formed by severe deformation processes” IPRoMM 2009, IIT Madras, July 10-11, 2009, p 122.

 

39 / S Dhanalakshi, N Balasubramani, P Sivakumar R Gnanamoorthy and M Balasubramaniam, ‘Effect SiC on the dry sliding wear behaviour of Al-SiC composite produced by stir casting’, National Seminar on Advanced Materials for Hostile Environment, Thiruvananthapuram, March 2007.

 

38 / Navaneethakrishnan, P., Ganesh Sundara Raman, S., Pathak, S. D.,Gnanamoorthy, R. and Ravi, N., Fretting Wear Behaviour of Diamond-like Carbon Coated Titanium Alloy Ti-6Al-4V, Diamond Jubilee Symposium on Advances in Materials Engineering, IISc, Bangalore, July, 2007.

 

37 / S Senthilvelan and R Gnanamoorthy ‘Effect of short fiber reinforcements on the damping characteristics of polymer composite gears’, National Conf on Industrial Problems in Machines & Mechanisms Kharagpur, Feb 2005, 139-144.

 

36 / A Sahaya Grinspan and R Gnanamoorthy ‘Development of a Novel Surface Modification Technique For The Introduction Residual Stress And Preliminary Studies On Alloy Steel, En 8’, Nmd ATM 2005 , Chennai Nov, 2005

 

35 / G Srinath and R Gnanamoorthy ‘Processing and Characterization of Polyamide organoclay nanocomposites prepared by melt intercalation technique’, Nmd ATM 2005, Chennai Nov 14-16.

 

34 / Shanmugavel M, Nandagopal M, Sandya R,. Valsan M Bhanusankara Rao K,. Mannan S.L and. Gnanamoorthy R, (2005) ‘Temperature Dependence of Tensile behaviour of 316L(N) SS weld joints’’ NMD-ATM-2005 IIT, Madras.

 

33 / S Senthilvelan and R Gnanamoorthy ‘Efficiency of short glass and carbon fiber reinforced injection molded nylon 6/6 gear ISAMPE National Conference on High Performance Composite Materials Coimbatore, Dec 9-10, 2005, .267-269.

 

32 / G Srinath and R Gnanamoorthy ‘Processing and Characterization of Polyamide organoclay nanocomposites prepared by melt intercalation technique’, NACOMM 2005, 12th National Conference, IIT Guwahati, 16-17 Dec, 2005, 331-336.

 

31 / S Dhanasekaran and R Gnanamoorthy ‘Abrasive wear behavior of Fe C Cu Sintered Steels containing MoS2, Processing and Characterization of Polyamide organoclay nanocomposites prepared by melt intercalation technique’, NACOMM 2005, 12th National Conference, IIT Guwahati, 16-17 Dec, 2005, 304-309.