International Journal Publications

108 / C Gurunathan, R Gnanamoorthy, S Jayavel, Prediction of frictional heating and temperature distribution in selective ceramic-reinforced polymer composite, (2014) Proc of the Inst of Mech Engineers, Pt J: Journal of Engg Tribology, 228 (12), pp. 1433-1442.

107 / SA Kumar, S Pradhan, SGS Raman, R Gnanamoorthy, Performance of alumina coatings prepared by hard anodizing, micro arc oxidation and detonation spray processes on Al–Mg–Si alloy under fretting wear loading, (2014) Proc of the Inst of Mech Engineers, Pt J: Journal of Engg Tribology, 228 (4), pp. 454-462.

106 / Gurusami, K., ShanmugaSundaram, K., Gnanamoorthy, R., Velamurali, Azhagarasan, N.S., Vijay, R., Harish Gopal, G. Experimental study on micro-structure, Fracture surface characterization and mechanical properties of ND: Yag laser surface treated commercially pure titanium and cobalt-chromium alloy (2014) Int J of Applied Engg Research, 9 (23), pp. 22107-22130.

105 / Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., Gnanamoorthy, R. (2013) Prediction of fretting wear behavior of surface mechanical attrition treated Ti-6Al-4V using artificial neural network Materials and Design, 49, pp. 992-999.

104 / Kumar, S.A., Sai, S.K., Raman, S.G.S., Gnanamoorthy, R.Fretting wear behaviour of 304 stainless steel fretted against different counterbody materials, (2013) Tribology - Materials, Surfaces & Interfaces, 7 (4), 168-174.

103 / Charles, D.F., Gnanamoorthy, R., Parag, R. (2013) The effect of nanoclay reinforcement on the rolling contact fatigue behaviour of polyamide Proc of Inst of Mech Engineers, Part J: J of Engg Tribology, 227 (1), pp. 84-95.

102 / Anand Kumar, S., Ganesh Sundara Raman, S., Sankara Narayanan, T.S.N., Gnanamoorthy, R. (2013) Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti-6Al-4V Tribology Int, 57, pp. 107-114.

101 / Arun Prakash, N., Gnanamoorthy, R., Kamaraj, M. (2012) Surface nanocrystallization of aluminium alloy by controlled ball impact technique Surface and Coatings Technology, 210, pp. 78-89.

100 / Arun Prakash, N., Gnanamoorthy, R., Kamaraj, M. Fretting wear behavior of controlled ball impact treated aluminium alloy under dry sliding condition (2012) Surface and Coatings Technology, 207, pp. 450-460.

99 / Arun Prakash N, Gnanamoorthy, R and Kamaraj (2012) ‘Fretting wear behaviour of fine grain structured aluminium alloy formed by oil jet peening and process under dry sliding condition’, Wear, 294-295, p.427-437.

98 / Kodeeswaran M, Gnanamoorthy R (2012) ‘A novel controlled impact process for the formation of nanostructured surface in AISI304 stainless steel’, Surface & Coatings Technology, 207, pp. 227-232.

97 / Anandakumar S, Ganesh Sundra Raman, T S N Sankaranarayanan, Gnanamoorthy R Fretting Wear Behaviour of surface mechanical attrition treated alloy 718’ Surface & Coatings Technology, 206 (2012) 4425-4432.

96 / Anandakumar S, Ganesh Sundra Raman, T S N Sankaranarayanan, Gnanamoorthy R (2012) ‘Fretting Wear Behaviour of Laser Peened Ti-6Al-4V’ Tribology Trans 55 (5), pp. 615-623.

95 / S Kirupa Sankar, C Gurunathan. R Gnanamoorthy, (2012) ‘Transmission efficiency of polyamide nanocomposite spur gears”, Materials & Design, 39, 2012, p.338-343.

94 / Anandakumar S, Ganesh Sundra Raman, T S N Sankaranarayanan, Gnanamoorthy R ‘Influence of surface mechanical attrition treatment on the fretting wear behaviour Ti-6Al-4V", Advanced Materials Research, 463-464, p316-320

93 / Gurunathan, C., Kirupasankar, S., Gnanamoorthy, R. Wear characteristics of polyamide nanocomposite spur gears (2011) Proc of the Inst of Mech Engineers, Part J: Journal of Engg Tribology, 225 (5), pp. 299-306.

92 / Timmaraju V M, K Kannan, Gnanamoorthy R Influence of imbibed moisture and organoclay on tensile and indentation behavior of polyamide 66/hectorite nanocomposites ", Composites Part B: Engineering 42 (3), pp. 466-472

91 / Timmaraju V M, K Kannan, Gnanamoorthy R ‘Effect of environment on flexural fatigue behavior of polyamide 66/hectorite nanocomposites", Int J of Fatigue 33 (4), pp. 541-548

90 / Timmaraju V M, K Kannan, Gnanamoorthy R Effect of initial imbibed moisture content on flexural fatigue behavior of polyamide 66/hectorite nanocomposites at laboratory condition", Materials Science and Engineering A 528 (6), pp. 2960-2966

89 / Saravanan R, Raghu V Prakash, Gnanamoorthy R, Vinodkumar, B, (2011) Analysis of crack severity on power density increment on gears’, AMAE Int J Manuf and Materials Engineering 1 (1), pp. 7-11.

88 / Mihitha. N, Gurunathan. C, Gnanamoorthy. R, ‘FE simulation of sliding wear in metallic material, Int J of Applied Engg Research, Vol.6, No.5, 2011, pp. 727-732.

87 / Arun Prakash N, Gnanamoorthy, R and Kamaraj (2010) Dry sliding wear behavior of oil jet peened aluminum alloy, AA6063-t6’, Proc. IMechE Pt J: J. Engg Tribology, 224 (11), pp. 1189-1196

86 / Finney Charles D, Gnanamoorthy R, Parag Ravindran, ‘Rolling contact fatigue behavior of polyamide clay reinforced nanocomposite - Effect of Load and Speed’, Wear 269 (7-8), pp. 565-571.

85 / Rajeesh, Gnanamoorthy R, Velumurugan, ‘Effect of moisture content on tensile behaviour of polyamide 6 nanocomposites’, Proc of I Mech: J. Materials: Design & Applications 224 (4), pp. 173-176.

84 / Arun Prakash N, Gnanamoorthy, R and Kamaraj (2010) Microstructural Evolution and Mechanical Properteis of oil jet peened aluminium alloy, Materials & Design, 31 (9), pp. 4066-4075.

83 / Ramkumar A, Gnanamoorthy R Effect of nanoclay addition on the displacement-controlled Flexural Fatigue Behavior of a polymer, J Mat Sci 45 (15), pp. 4180-4187

82 / Timmaraju V M, K Kannan, Gnanamoorthy R Influence of organoclay on flexural fatigue behavior of polyamide 66/hectorite nanocomposites at laboratory condition", Polymer Composites 31 (11), pp. 1977-1986.

81 / Rajeesh K R, Gnanamoorthy, R and Velmurugan R (2010) ‘Effect of Humidity on the Indentation Hardness and Flexural Fatigue Behavior of Polyamide 6 Nanocomposite, Mat. Sci. Eng A; A 527 2826–2830.

80 / A Sahaya Grinspan and R Gnanamoorthy (2010)’ Impact force of low velocity liquid droplets measured using piezo electric PVDF film’, Colloids & Surfaces A: Physiochemical and Engineering Aspects, 356, (1-3) 162-168 (JIF 1.926).