Presented at International Conferences

81 / Timmaraju M, R. Gnanamoorthy, K Kannan “Mechanical and temal characteristics of polyamide 66 clay nanocomposites’, Polymer Congress – Vision and Scenerio, APA, New Delhi 2009.

​

80 / Arun Prakash N, R. Gnanamoorthy, M. Kamaraj, “Formation of nanocrystalline structure in aluminium alloys by Severe surface deformation processes” 23rd Int Conf on Surface Modification Technologies (SMT 23), Nov 2009, Chennai, p.55.

​

79 / Gnanamoorthy R, Kodeeswaran M, and Arun Prakash N, “Controlled ball impact process – A new approach for the development of nanocrystalline surfaces”, 4th Int Conf on Recent advances in Materials, Minerals & Environment and 2nd Asian Symp on Materials & Processing (RAMM & ASMP 2009), 1–3 June 2009, Penang.

​

78 / Arun Prakash N, R. Gnanamoorthy, M. Kamaraj, “Nanocrystalline structure formation in aluminium alloy by controlled ball impact technique” 1st Int conf on Nanostructured Materials and Nanocomposites’ 6-8 Apr 2009, Kottayam, India.

​

77 / Rajeesh. K. R, R. Gnanamoorthy, R. Velmurugan "Effect of humidity on the flexural creep behavior of polyamide 6 and polyamide 6 nanocomposites", 1st Int Conf on Nano Structured Materials and Nanocomposites (ICNM), April 6-8, 2009, Kottayam, India, Paper ID: IL 173

​

76 / Kirupa sankar S, R. Gnanamoorthy, R. Velmurugan "Performance of polymer Nano composite gears’, 1st Int Conf on Nano Structured Materials and Nanocomposites (ICNM), April 6-8, 2009, Kottayam, Paper ID: IL 173

​

75 / Rajeesh. K. Ravindran, R. Gnanamoorthy, R. Velmurugan ‘Effect of Humidity on the Flexural Fatigue Behavior of Polyamide 6 and Nanocomposites’, Proc. 2nd Int Symp on Adv Materials & Polymers for Aerospace and Defense Applications (SAMPADA), Dec. 8-12, 2008, Pune, Paper ID: PS-S21-OR-1

​

74 / Arun Prakash N, R. Gnanamoorthy, M. Kamaraj, ‘Friction and wear behavior of surface nanocrystallisation of aluminium alloy under dry sliding condition’, Proc. 2nd Int Symp SAMPADA, Dec. 8-12, 2008, Pune, Paper ID: S6-OR-17

​

73 / Arun Prakash N, R. Gnanamoorthy, M. Kamaraj, ‘Dry sliding wear behavior of oil jet peened aluminium alloy AA6063-T6’, Proc. 6th Int Conf on Industrial Tribology (ICIT - 08), Nov. 6-8, 2008, New Delhi, Paper ID: P025

​

72 / Finney Charles D, R Gnanamoorthy, Parag Ravindran, ‘Effect of Rolling Speed on Rolling Contact Fatigue Behaviour of Polymer Clay Based Nanocomposites’, Proc. 6th ICIT - 08, Nov. 6-8, 2008, New Delhi, Paper ID: P023

​

71 / Kirupasankar S, R. Gnanamoorthy, R. Velmurugan, ‘Sliding Frictional Behaviour of Polyamide 6 and Nanocomposite– Effect of Apparent Area of Contact‘, Proc. 2nd Int Symp SAMPADA, Dec. 8-12, 2008, Pune, Paper ID: S17-OR-50

​

70 / Timmaraju V. M, Gnanamoorthy R, Krishna Kannan, ‘Flexural Fatigue Behavior of Nylon 66 in Humid Conditions’, Proc. Int Symp For Research Scholars (ISRS – 08) Dec. 10-12, 2008, Chennai, Paper ID: M1-03.

​

69 / Ramkumar A and R Gnanamoorthy, ‘High Temperature Flexural Fatigue Behavior of Polyamide 6 Nanocomposites’, IISc Centenary – Int Conf on Advances in Mechanical Engg (IC-ICAME), Bangalore, July 2-4, 2008 p7.

​

68 / Kodeeswaran M and R Gnanamoorthy, ‘A novel controlled impact surface modification process for nanocrystallization’, IISc Centenary – Int Conf on Advances in Mechanical Engg (IC-ICAME), Bangalore, July 2-4, 2008, p6.

​

67 / Finney Charles D and R Gnanamoorthy, ‘Rolling Contact Fatigue Behavior of Polyamide 6 Nancocomposites’, IISc Centenary – Int Conf on Advances in Mechanical Engg (IC-ICAME), Bangalore, July 2-4, 2008, p54.

​

66 / Govindarajan N and R Gnanamoorthy, ‘Ferrography - An approach for Measuring Wear Rate’, IISc Centenary – Int Conf on Advances in Mechanical Engg (IC-ICAME), Bangalore, July 2-4, 2008, p 57.

​

65 / Ramkumar A and R Gnanamoorthy, ‘Flexual and axial fatigue behaviour of polyamide 6 nanocomposites’, Proc Int Conf INCCOM-6 on Future Trends in Comp Materials and Processing, IIT Kanpur, 12-14 Dec 2007, p.204-207.

​

64 / S Senthilvelan and R Gnanamoorthy ‘Influence of carbon fiber reinforcement over the accuracy of injection molded polymer gear’ 9th Int Symp on Measurement & Quality Control, Chennai, 21-24 Nov 2007, pp237-242.

​

63 / R Gnanamoorthy, ‘Wear mechanisms – An overview’, Advances in Surface Technology – International Workshop, Chennai June 29-30. p 1.

​

62 / Ramkumar A and R Gnanamoorthy, ‘Modulus drop due to fatigue in polyamide 6 nanocomposites’, Int Conf on Adv in Materials Engg, Bangalore, July 2007, p.51.

​

61 / Navaneethakrishnan, P, S Ganesh Sundara Raman, S D Pathak, R Gnanamoorthy an N Ravi, ‘Fretting wear behaviour of diamond like carbon coated titanium alloy Ti-6Al, 4V’, Int Conf on Adv in Materials Engg, IISc Bangalore, 4-6 July 2007, p.47.

​

60 / Dipa Roy, R Gnanamoorthy, A K Mohanty, L T Drzal, and M Misra, ‘A study of the mechanical, thermal and wear behaviour of fly ash filled vinylester rein matrix composites’, 2nd Int Conf on Recent Advances in Composite Materials, New Delhi, Feb 2007, p.32

​

59 / A Sahaya Grinspan and R Gnanamoorthy ‘Cavitation Oil Jet Peening Process – A New Surface Modification Process: Studies on AA6063 T6’, Int Symp for Research Scholars, IIT Madras, Chennai, 18-20 Dec 2006, p. 60.

​

58 / Dharmendra Sharma and R Gnanamoorthy ‘Effect of Surface Roughness on the Fretting Wear Behaviour of Nylon 6 Clay Nanocomposites’, Int Symp for Research Scholars, IIT Madras, Chennai, 18-20 Dec 2006, p. 68.

​

57 / S Dhanasekaran and R Gnanamoorthy ‘A Novel Fe C CU Ni MoS2 Sintered Alloys for Gear Applications’, ISRS, IIT Madras, Chennai, 20 Dec 2006, p. 139.

​

56 / Aravind Vadiraj, M Kamaraj and R Gnanamoorthy, ‘Fretting Wear Studies of Surface Modified Biomedical Titanium Alloys’, Int Symp on Tribo Corrosion 2006, Non Ferrous Materials Tech Dev Cenre, Hyderabad, 4-5 Dec 2006, p. 22

​

55 / N Govindarajan, R Gnanamoorthy, C Bhaskaran and B P Shastry ‘Fatigue Life Prediction of Porous Steels under Rolling / Sliding Contact Conditions by Fracture Mechanics Approach’, Int Conf on Industrial Tribology, ICIT 2006, IISc, Bangalore, Nov 2006, p. 93.

​

54 / C Gurunathan and R Gnanamoorthy, ‘Wear Characteristics of Nylon Polymer Clay Nanocomposite Gears’, Int Conf on Industrial Tribology, ICIT 2006, IISc, Bangalore, 30 Nov 2006, p. 117.

​

53 / M Dharmendra Sharma and R Gnanamoorthy ‘Fretting Wear Characteristics of Nylon 6 Clay Nanocomposite’, Int Conf on Industrial Tribology, ICIT 2006, IISc, Bangalore, 30 Nov 2006, p. 118.

​

52 / A Sahaya Grinspan and R Gnanamoorthy ‘Fatigue Behaviour of Oil Jet Peened Aluminium Alloy, AA 6063-T6’ ASMP 2006, Asian Symposium on Materials and Processing, Bangkok, Thailand, 9-10 November 2006, p. 103.

​

51 / R Gnanamoorthy and S Dhanasekaran ‘Effect of MoS2 Addition on the Performance of Sintered Spur Gears under Unlubricated Conditions’, Asian Symposium on Materials and Processing, Bangkok, Nov 2006, p. 84.

​

50 / S Dhanasekaran and R Gnanamoorthy ‘Wear Characteristics of Spur Gears mad using Fe-C-Cu+MOS2 Sintered Alloys’, MS&T 2006, Materials Science and Technology Conf and Exh 2006 Oct 2006, Cincinnati, USA

​

49 / A Sahaya Grinspan and R Gnanamoorthy ‘Surface Modification of Steel Using Liquid Jet Peening (Fatigue Performance)’ Int Conf on Processing & Manufacture of Advanced Materials, Vancouver, July 2006, p. 205.

​

48 / A Sahaya Grinspan and R Gnanamoorthy ‘Effect of Peening Duration on the Fatigue Behaviour of Oil Jet Peened Medium Carbon Steel’ Int Seminar on the Fatigue, Fracture and Durability, Bangalore, India, 26-28 June 2006,

​

47 / A Sahaya Grinspan and R Gnanamoorthy ‘Finite Element Study on the Residual Stress Formation in Oil Jet Peening’ Int Seminar on the Fatigue, Fracture and Durability, Bangalore, India, 26-28 June 2006, p.

​

46 / A Sahaya Grinspan and R Gnanamoorthy ‘Fatigue Behavior of Oil Jet Peened Carbon Steels’ Int Conf on Pressure Vessels and Piping, Chennai, Feb 2006.

​

45 / G Srinath and R Gnanamoorthy, ‘High Temperature Tribo behaviour Of Nylon 6 Clay Nanocomposites’ Int Conf Advances in Mat and Proc 2006 Kharagpur.

​

44 / S Dhanasekaran and R Gnanamoorthy ‘Development Of A New N2+H2 Sintered Steels Containing MoS2 and its Mechanical Properties’, Icammp-2006, Feb 2006 Kharagpur.

​

43 / A Sahaya Grinspan and R Gnanamoorthy ‘Liquid Jet Peening – A Novel Surface Modification Process; Studies on Al Alloy Aa6063-T6 and Aa6061-T4’ Icammp-2006, 3-5 Feb 2006 Kharagpur.

​

42 / S. Dhanasekaran and R Gnanamoorthy ‘Effect of solid lubricant addition on the tribological behavior for sintered steels’, The global happening on particulate materials for automotive and engineering industry, Int Conference With Trade Exhibition And Particulate World, Feb 2005.

​

41 / S Senthilvelan and R Gnanamoorthy ‘Performance of polymer composite gears-effect of tooth deflection’ 63 SPE Annual Tech Conf Boston, May 2005, 1504-1508.

​

40 / A Sahaya Grinspan and R Gnanamoorthy ‘Studies on Surface Morphology and Mass Loss Rate in the Oil Jet Peened Al Alloy’, Int Conf on Advances in Materials, Product Design & Manf Systems, Sathyamangalam, 12-14, Dec 2005

​

39 / S Senthilvelan and R Gnanamoorthy ‘Contact stress analysis of unreinforced, glass and Carbon reinforced nylon 6/6 spur gears the Int Conf on Advances in Materials, Product Design & Manf Systems, Sathyamangalam, 12-14, Dec 2005.