Presented at International Conferences
2000 - 2004
38 / S Senthilvelan and R. Gnanamoorthy. ‘New thermoplastic polymer composite gear for automotive applications’, Int Exhibition & Conf on Advancement in Materials & Processes for Transportations Sector, Mumbai, Nov 2004.
37 / G. Srinath and R. Gnanamoorthy, ‘Tribo-behaviour of Advanced Reinforced Nylons, Int Exhn & Conf on Adv in Matls & Proc for Trans Sector, Mumbai, Nov 2004.
36 / G Srinath and R. Gnanamoorthy, ‘Friction and wear characteristics of nylon-clay nanocomposites under dry sliding conditions’ 1st Int Conf on Advanced Tribology, Singapore, Dec 2004, B-13.
35 / R. Ramesh and R Gnanamoorthy ‘Fretting wear behaviour of borided structural steel, En24, against bearing Steel, En31’ 1st Int Conf on Advanced Tribology (iCAT2004), Dec 2004, Singapore, p.B-7
34 / G. Srinath and R. Gnanamoorthy, ‘Processing and abrasive wear behaviour of Nylon nanocomposites’ ISRS, IIT Madras, Dec 2004.
33 / S. Dhanasekaran, and R Gnanamoorthy ‘Development of self lubricating sintered steels for tribological applications’, ISRS, Dec 2004, p68.
32 / R. Ramesh and R Gnanamoorthy ‘Effect of nitriding condition on fretting wear of En24 steel, ‘Proc of Int Conf on Heat Treatment ASM, Chennai, 2004, p.A29.
31 / R. Ramesh and R Gnanamoorthy ‘Effect of post oxidation on the fretting wear performance of liquid nitrided En24 steels’, Int Conf on Surface Engineering, INCOSURF2004, Aug 25-27, Bangalore, India.
30 / S Senthilvelan and R. Gnanamoorthy, “Performance and Failure Analysis of Injection Molded Carbon Reinforced Nylon Gears”, 7th Biennial ASME Conf Engineering Systems Design And Analysis, July 19-22, 2004, University of Manchester, U K. Paper no. ESDA 2004-58303( .21-22)
29 / R. Ramesh and R Gnanamoorthy ‘An investigation on fretting wear properties of MoS2 bonded solid lubricant coatings’, Proc Indo-Japan Conf on Damage Tolerant Design & Materials, Dec 2004, Chennai, p.175.
28 / S Senthilvelan and R Gnanamoorthy ‘Effect of fiber length on surface failure of injection molded glass reinforced Nylon gears’, Indo Japan Conf on Damage Tolerant Design and Materials, Chennai, Dec 2004, 277-280.
27 / N Govindarajan and R Gnanamoorthy Contact Fatigue life Prediction of Sintered steels Indo-Japan Conf on Damage Tolerant Design & Materials, IIT Madras Dec 2004, 129 –135
26 / T Nagahama, Y Yoshimura, H Morikoshi, R Gnanamoorthy, Y Miysahita and Y Mutoh ‘Rolling Contact Fatigue Beahviour of sitnerd alloy’ Indo-Japan Conf on Damage Tolerant Design & Materials, IIT Madras Dec 2004, 236-239.
25 / R. Gnanamoorthy, “Processing and Properties of in situ niobium aluminide intermetallic”, Int Conf on Non Ferrous Metals, Varanasi, p141-149, July 2003.
24 / N K Ramakrishna Naidu, S Ganesh Sundara Raman, and R. Gnanamoorthy, ‘Plane Bending Fretting Fatigue Behavior of an Aluminium Alloy (6061-T6)”, Int Conf on Non Ferrous Metals – 2003, Varanasi, p. 151-159, July 2003.
23 / 3 R Gnanamoorthy and J Krishnakumar ‘Rolling Contact Fatigue Behavior of Surface Treated Sintered Steels’ Proc of Int Conf on Advances in Surface Treatment Research and Application (ASTRA), Nov, 2003, Hyderabad, India
22 / S Senthilvelan and R Gnanamoorthy ‘Reinforced polymer gear fatigue and failure analysis” 4th Conf on Creep Fatigue and Creep Fatigue Interaction, Kalpakkam, Oct, 2003, C127-C133.
21 / R. Ramesh and R Gnanamoorthy ‘Fretting wear behavior of liquid nitrided En24 steel fretted with hardened En 31 bearing steel’, Proc Int Conf on Adv in Surf Treatment Res and Application (ASTRA), Nov Hyderabad, 2003, p. 321.
20 / R Gnanamoorthy “Fracture toughness of niobium aluminide base intermetallics in air and vacuum” Proc of Int Conf On Advances in Materials and Materials Processing (Icammp-2002), Kharagpur, 2002.
19 / R. Gnanamoorthy, N. Rajiv, K. Gopinath, Y. Miyashita and Y. Mutoh “Damage Mechanisms Under Rolling Contact Fatigue of Sintered and Hardened Steels” Proc of Int Conf on Advances in Materials and Materials Processing, Kharagpur, 2002.
18 / N Govindarajan, R. Gnanamoorthy, Y. Miyashita and Y. Mutoh “Rolling And Sliding Contact Fatigue Behavior Of Sintered Steel”, Proc of Int Conf on Powder Metallurgy for Automotive Components, New Delhi, 203- 209, Jan, 2002.
17 / R. Gnanamoorthy, Bharathi Sekar, N Govindarajan, Y. Miyashita and Y. Mutoh “Influence of Processing Parameters on Rolling Contact Fatigue Behavior Of Automotive Sintered Steel”, Proc of Int Conf on Metals and Materials for Automobile Industry, IIM, New Delhi, .159-167, Sep 13 & 14 2002.
16 / R. Gnanamoorthy, ‘Microstructure and strength of powder metallurgically processes niobium aluminide base intermetallic composites’, Proc of Int Conf on Mechanical Alloying, Jaipur, 165-172, Feb 2001
15 / R. Gnanamoorthy, Y Miyahsita, M Horikokshi, J Q Xu, Y Mutoh, H Fukuhara, ‘Effect of Density on Contact Fatigue Behavior of and Damage Mechanisms of Sintered Alloys”, 9th Materials and Processing Conf (M & P) JSME, 2001.